hello fellow dsi mopho users

here is the installation manual for the bcr 2000 dsi mopho patches.

first of all you should get birdies bcr editor from this webpage http://shoshin.110mb.com/genmce/bcr2000/Editors/Editors.htm

after you installed birdies and you hook up youre bcr 2000 the right way , midi out of your midi interface to your midi in on the bcr 2000 and the midi in of your midi interface on the first midi out port of the bcr 2000. 

when you have hooked up the bcr 2000 to your midi interface you must open birdies bcr 2000 editor.

than you do the following.

first  you change the settings of the midi input and the midi output found in the middle up in birdies screen ,make sure dat you choose the right midi interface otherwise it wont work.

than you make sure you putt your bcr 2000 on the patch page where you want the dsi mopho patches to be written to.

than you open file and choose open , than you look for the folder of the bcr 2000 dsi mopho patches.

than you click on the bcr 2000 mopho patch 1 and open it.

once it is opened you press send and birdies will send the sysex to the bcr 2000 (if done correct you will see your bcr 2000 screen have a rotating light in the leddisplay).

after you have done this you press store on your bcr 2000.

now you have installed patch 1.

repeat this for the remaining 5 patches all on the place where you want them to be.

voila you are ready to tweak and freak with the bcr 2000 and the dsi mopho.

i hope you enjoy your dsi mopho and the bcr 2000.




made by www.whiteduvproductions.nl

author: donfifis

p.s. also included is a init patch for the bcr so you can make a patch yourself from scratch.

*there is no need to instal the $sysextemp.syx file.